Who we are
Customer Support
News
Contact Us
Intranet
 
 
 
GMB Trim/List Indication system has been designed as cost effective, rigid against shagging or hogging of ship, and GMB has a long and successful history of Trim/List Indication system for the LNGC.
For calculating amount of cargo link LNG, the trim List indicator System is measuring the ship's incline. So, it is required much more highly accuracy. GMB Trim/List Indication system is installed the sensor at gravity center of ship. The gravity center of ship is well known the effect of sagging and hogging is very low.
 

The type of this inclinometer is Accelerometer type sensor.
The Trim/List Indicator Sensor is servo type which is an accelerometer used in the earth gravity field(¡¾1g).
This instrument consists of an inertial mass pendulum which is:
- Rotating around a torsion bar
- Servo controlled in position by means of an inductive torque, whose current is proportional to the applied acceleration.
The position sensor is optical. For small angles, the measured acceleration can be considered as equal to the angle; it is necessary to make an ArcSin conversion to determine the angle of tilt for wider ranges. This technology allows to get very sensitive inclinometers(<0.5 angle sec) without Hysteresis. With 1X 10-4 FSO accuracy and an important dynamic.

 
Trim/List Indicator System is interfaced with IAS, CTS and Analog Indicator located CCR and Wheel House with 4~20mA Signal.
GMB Trim/List Indicator has two types of sensor for hazardous area application, one is normal type sensor used to Zone 1 area the other is intrinsically safety type sensor used to Zone 0.
 
  Others
GMB
Remarks
sensor type Pendulum Servo
(maker : Sensorex)
Servo type sensor is more accurate than Pendulum type and life time is longer than pendulum type.
Accuracy
(Non Linearity)
0.5% FS 0.05% FS Ship builder Specification :
+/-0.5% FS
GMB sensor is more accurate 100 times.
Install location Equipment Room
(Accommodation)
No.3 Cofferdam
(Gravity center of Ship)
Refer to No.1 description
Signal Distributor PCB type Proven commercial equipment  
signal type 1~5V 4~20 mA  
Hazardous area Not Available
(Normal type)
Available
(IS type)
 
Long distance install N/A Available Sensor output signal (4~20mA) is
< Table. Comparison between GMB Trim/List Indicator and Others>
   
 
 

HOME | KOREAN | ENGLISH | SITEMAP

¨Ï Copyright 2004, GMB Inc. All International Rights Reserved.